featured image thumbnail for project FTG Turbo Disc Dryer


The robust and energy efficient drying of Biomasses

Residuals for fishmeal in both land based and ship installed plants. Ingredients in the food industry. Spent grains in distilleries and breweries. Animal and poultry by-products for industrial bio-sludge and mineral sludge

The Fjell Turbo Disc Dryer is designed for indirect heating by steam (6-10 bar). The dryer can be delivered for vacuum drying of temperature sensitive raw materials. The largest heating surface is the rotor, but additional heating surface is available as an option on the stator. The product to be dried is slowly, but vigorously, transported from inlet to outlet end by a paddle system mounted on the disc periphery.

Product discharge is normally done continuously by a speed controlled extraction screw conveyor. The discs are mounted on a heavy central shaft with a highly efficient condensate removal system integrated. Scraper bars ensure agitation between the discs, which is necessary for an efficient evaporation. The moisture evaporated from the product is collected in a high top vapour dome, and continuously removed.

Dryers can be supplied in all practical sizes, in all common materials of construction (carbon-, stainless-, and duplex steels), and approved and inspected according to the leading international design codes and standards (PED, ASME, JIS, GOST, DNV, Lloyds, Bureau Veritas etc..) The dryer has a unique endurable patented rotor design without traditional welding, which stays exposed to tear, wear, fatigue and corrosion.

The distinct difference between the TD dryer and most other disc dryers is that staybolt welds (or welds of other means to maintain the integrity of the disc when exposed to internal steam pressure) is entirely on the inside of the disc. Fjell has in its process for drying with disc-driers a patented process solution reducing usage of steam with approx. 40% from normal driers.

Mass and Energy Balance

All MWWT plants are being calculated based on given numbers for quantity to be processed. This calculation are set up in a Mass and Energy Balance Scheme to specify dimensions on all equipment and piping.


After finalizing a M&E balance we produce a flowsheet and 3D drawing to optimize the tradeoff between size, quality in materials and cost.


Together with client or yard, we produce all necessarry drawings and plan all interfaces for easy assembly and use. Of course PLC system are included - and can be integrated in most common PLC systems (for global control)

Standard sizes

Model TD150 - Heating surface 150m2

Model TD200 - Heating surface 200m2

Model TD 300 - Heating surface 300m2

Model TD400 - Heating surface 400m2

Model TD500 - Heating surface 500m2

Model TD600 - Heating surface 600m2

Model TD650 - Heating surface 650m2

Advantages between Fjell TD Dryer vs. other Rotadisc dryers:

  • Forged claws can be welded with high precision in flat position using robots.
  • Welds can be inspected with NDT before assembly.
  • Welds are not exposed to the material to be dried, thereby risk for stress corrosion cracking is eliminated.
  • Welds do not seal between pressurised and non-pressurised side. Thereby risk for steam leakage is eliminated.
  • Claws act as reinforcement beams in radial direction, thereby increasing the lateral bending strength of the discs, which reduces the risk for leakages in foot welds between discs (big problem with Rotadisc).
  • Smooth disc surface secures efficient self-cleaning and maximum heat transfer
fullwidthimage for product FTG Turbo Disc Dryer

Standard Range Fjell Turbo Disc Dryers are corresponding to fishmeal plants from 60TPD to 650TPD

featured image thumbnail for project FTG Turbo Disc Dryer

The robust and energy efficient drying of Biomasses

Your partner for mass and heat transfer technology